# Enabling Capture+ Validation

HTML version: [Enabling Capture+ Validation](https://support.gladstonesoftware.cloud/gooperator/enabling-capture-validation)

## Problem
You need to enable Loqate Capture+ validation in either the Go platform or G360, replacing the previous GB Group Matchcode validation service.

## Resolution

### Enabling Capture+ Validation for Go

1. Log in to Operator.
2. Navigate to **Configuration > Configure module**.
3. Search for **Capture+**.
4. Update the following settings:
    - **Capture+ Auth Key**: Enter your GO Loqate Capture+ Key (this is a 16-character key provided when you activate your Loqate account).
    - **Validation Provider**: Change this setting to `capture+`.
5. Save your changes.

> **Note:** The key `XXXX-XXXX-XXXX-XXXX` is an example only. Use your valid LIVE GO Loqate Capture+ Key.

### Enabling Capture+ Validation for G360

1. Log in to G360.
2. Open the **GMC module**.
3. Navigate to **Configuration Manager > Configuration > Gladstone360 Front Of House > Identity Validation**.
4. Ensure **Capture+ Enabled** is ticked.
5. Enter your G360 Capture+ Key (a 16-character key provided when you activate your Loqate account).
6. Save your changes.

> **Note:** The key `XXXX-XXXX-XXXX-XXXX` shown in examples is for illustration only. Use your valid LIVE G360 Loqate Capture+ Key.

## Notes

- Separate authorisation keys are required for Go and G360. If you are unsure of your keys, contact your GB Group Partner Manager.
- If switching from Matchcode to Capture+, your existing Matchcode service credits will be transferred to Capture+ by your GB Group Partner Manager after setup.
- If you need assistance locating your Capture+ Key, contact your GB Group Partner Manager.
- Related: [Direct Debit Mandate Details and Bank Validation in Go Operator](direct-debit-mandate-details-and-bank-validation-in-go-operator.md) (GB Group credentials and bank validation for Direct Debit sales on Go); [Configuring GBGroup for Plus2](../kb/configuring-gbgroup-for-plus2.md).