Enabling Capture+ Validation

Problem

You need to enable Loqate Capture+ validation in either the Go platform or G360, replacing the previous GB Group Matchcode validation service.

Resolution

Enabling Capture+ Validation for Go

1. Log in to Operator.
2. Navigate to Configuration > Configure module.
3. Search for Capture+.
4. Update the following settings:
   • Capture+ Auth Key: Enter your GO Loqate Capture+ Key (this is a 16-character key provided when you activate your Loqate account).
   • Validation Provider: Change this setting to capture+.
5. Save your changes.

Note: The key XXXX-XXXX-XXXX-XXXX is an example only. Use your valid LIVE GO Loqate Capture+ Key.

Enabling Capture+ Validation for G360

1. Log in to G360.
2. Open the GMC module.
3. Navigate to Configuration Manager > Configuration > Gladstone360 Front Of House > Identity Validation.
4. Ensure Capture+ Enabled is ticked.
5. Enter your G360 Capture+ Key (a 16-character key provided when you activate your Loqate account).
6. Save your changes.

Note: The key XXXX-XXXX-XXXX-XXXX shown in examples is for illustration only. Use your valid LIVE G360 Loqate Capture+ Key.

Notes

• Separate authorisation keys are required for Go and G360. If you are unsure of your keys, contact your GB Group Partner Manager.
• If switching from Matchcode to Capture+, your existing Matchcode service credits will be transferred to Capture+ by your GB Group Partner Manager after setup.
• If you need assistance locating your Capture+ Key, contact your GB Group Partner Manager.
• Related: Direct Debit Mandate Details and Bank Validation in Go Operator (GB Group credentials and bank validation for Direct Debit sales on Go); Configuring GBGroup for Plus2.

This page as markdown · All pages · llms.txt